Shenzhen Huawenyi Technology Co., Ltd.
Main products:injector cleaner,code reader,auto diagnostic platform,a/c service station,wheel aligner
Products
Contact Us
  • Contact Person : Mr. Yang Yijian
  • Company Name : Shenzhen Huawenyi Technology Co., Ltd.
  • Tel : 0086-755-82844185
  • Fax : 0086-755-89358139
  • Address : Guangdong,Shenzhen,Floor 12, Shang zhu Building, No1 Industrial Zone, Nan Keng Village,Wuhe South Street,Ban Tian, Long Gang Distrct
  • Country/Region : China
  • Zip : 518129

Auto Battery Analyzer

Auto Battery Analyzer
Product Detailed
This Battery Analyzer is designed to test the condition of the automotive battery using conductance method.

Weight:0.90 KG This Battery Analyzer is designed to test the condition of the automotive battery using conductance method. Unlike the conventional method of draining the battery by applying resistance load to it and obtain the result from the meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it. The benefits of this test method are:Conductance correlates directly to the battery capacityPassive testing method is safe.Never discharges or drain the battery.Able to test condition of discharged battery.Consistent and repeatable results.Provides unique indication of battery conditions. Besides, this analyzer also provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required. It powers up when connected to the battery posts during testing. Key FeaturesSimple and easy to useTest batteries on and off the vehicleAccurate results in millisecondsBattery Life AnalysisAnalysis Result : Good or ReplaceLarge easy to read LCD display.Test results based on JIS, EN, DIN, SAE and IEC Standards.Check Alternator charging conditionsCheck Engine Starter conditions. Functionality:Test Result: Good or ReplaceCapacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.Internal resistance value (mΩ )Life in percentage (%) Application:Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported. Operating Parameters:System voltage: 12 VoltsInput voltage range: 9V~15VPower requirements: No internal batteries required. Power on when hooked up during testing.Testing range: 100 ~ 1700 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN Test Time: Less than 5 seconds. 

Auto Battery Analyzer



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.